Features |
1. Low power consumption: 0.9kwh-2.5kwh for each turn of forming opertation |
2. Easy and convenient operation, few waste or faults of materials |
3. To heat and soft the acrylic materials by light-engergy, it only needs 8-10 minutes for froming up the signs, from put the material into it till the surface has beed shaped |
4. No limits to the thickness of arcylic material, and no influence to the environmental temperature, even cold climate does not affect the production |
5. One perspnl can process the operation from the begin to finish |
6. May make shaping mold without engraving machine. It can shape acrylic sheet into surfaces such as flat, ball-like, curved, and relievo freely by just a single manual carved mold of flat surface with hardwood or high-density plate. |
7. Flashing signs formed by the machine not only have strong stereoscopic sense under day light, but also have well raising lighting uniformity in the night. |
8. The cost of signs with curved relievo surface produced by the machine, is obviously lower than signs produced by other analogous vacuum forming machine, but in higter selling price |
Parameter |
Model |
YH-8080E |
Voltage/Frequency |
220V/50Hz |
Rated Power |
8000 watt |
Power consumption |
0.8 KWH/Once |
Dimension |
0.8x0.8x1.1m |
Avaliable shaping area |
60x60cm |
Forming time |
8-10 minutes |
Packing dimension |
1.2x1.2x1.3m |
Net weight |
180KG |
Gross weight |
250KG |